Electrochemical performance of a nano SnO2-modified LiNi1/3Co1/3Mn1/3O2 cathode material

The nano SnO₂-modified LiNi_1/3Co_1/3Mn_1/3O₂ was successfully prepared by a carrier transfer method. The pristine and modified samples were characterized with various techniques such as XRD, SEM, XPS and EDS. The results showed that the SnO₂ particles did not enter the crystal structure of LiNi1/3Co1/ 3Mn1/3O₂, many nano SnO₂ particles were uniformly covered on the surface of LiNi_1/3Co_1/3Mn_1/3O₂ and the modified thin layer could inhibit the dissolution of transition metal oxides. The electrochemical tests indicated that the existence of nano SnO₂ could improve the discharge capacity and rate capability owing to the decreased interfacial polarization. The cycling stability was remarkably improved at room temperature and 55 ℃. The XRD patterns of the fresh NCM electrode and after 50 cycles proved that the structural change of NCM was not so effective on the capacity fade.     

基于纳米二氧化钛的光催化自清洁面料研究进展

由于市场需求的多样化,近年来功能性服装已经成为越来越多人的选择。自清洁服装因其具有免洗、节水、节能、环境友好等特点而受到广泛关注。纳米二氧化钛(TiO_2)由于其优异的光致催化降解污染物性能、紫外屏蔽性能以及优异的抗菌性能成为制备多功能自清洁面料的最佳选择。本文介绍了纳米TiO_2的光催化降解污染物、紫外屏蔽和抗菌机理,总结了光催化自清洁面料目前面临的主要问题以及其研究进展,并对光催化自清洁面料的前景进行了展望。     

纳米自组装γ-Al_2O_3孔隙结构的核磁共振表征

纳米自组装γ-Al_2O_3具有两种纳米级孔道,可作为适合于大分子扩散的催化剂载体,也可用于页岩气藏模型。表征纳米材料孔隙结构的方法有扫描电镜、氮吸附法及压汞法等,各有局限。本文利用核磁共振弛豫测量对纳米自组装γ-Al_2O_3孔隙结构进行研究和定量表征,并通过核磁共振实验和数值模拟对纳米自组装γ-Al_2O_3表面弛豫强度及孔径分布进行探索。结果表明,数值模拟核磁弛豫表征的纳米自组装γ-Al_2O_3的主体孔径为5-7 nm和30-42 nm,核磁弛豫实验通过误差函数法表征的主体孔径为5-9 nm和29-47 nm。相比于氮吸附仅表征微孔介孔及部分大孔,不能表征大于100 nm孔径,压汞法描述小于10 nm孔径相对不准确等问题,核磁弛豫能够全面表征2.8-315 nm纳米自组装γ-Al_2O_3的双峰孔隙系统。三个样品S-1、S-2、S-3的横向弛豫时间T_2谱小孔大孔波峰的信号幅度比0.603、1.15、1.84直接反映各自的化学小孔大孔氧化铝投料比0.85、1.38、1.7的变化。建立的表征方法可以应用于页岩气微观结构和机理研究中,前景广阔。     

Preparation of Nano Silica Supported Sodium Hydrogen Sulfate: As an Efficient Catalyst for the Trimethyl,Triethyl and t‐Butyldimethyl Silylations of Aliphatic and Aromatic Alcohols in Solution and under Solvent‐free Conditions

Nano silica supported sodium hydrogen sulfate has been prepared by mixing NaHSO₄ with activated Nano silicagel. We wish to report a new method for the synthesis of trimethyl (TMS), triethyl (TES) and t‐butyldimethyl silyl (TBS) ethers from benzylic, allylic, propargylic alcohols, phenols, naphtholes and some of phenolic drugs in the solution and under solvent‐free conditions.     

金纳米粒子的合成、特性及其在生物医学检测中的应用研究进展

近年来,纳米技术越来越广泛的应用到各个领域,金纳米粒子因其具有许多优良的物理、化学及生物学性质而引起了人们特别的关注。本文综述了金纳米粒子几种经典的合成方法,以及基于金纳米粒子独特的理化性质在病原体、核酸蛋白质检测方面的最新研究进展。     

Solid-supported palladium nano and microparticles: an efficient heterogeneous catalyst for ligand-free Suzuki-Miyaura cross coupling reaction

Solid-supported nano and microparticles of Pd(0) (SS-Pd) were prepared and used as heterogeneous catalysts for Suzuki-Miyaura cross coupling reactions of aryl halides (chloro, bromo and iodo) and phenyl boronic acid under mild and ligand-free conditions. Scanning electron microscope (SEM) and UV-vis based studies were performed to observe the distribution of nano and microparticles of palladium over solid surface and their oxidation states. In addition, the catalyst could be reused up to seven runs without significant loss of activity and stable enough under moist conditions.     

Fluorine sites in glasses and transparent glass-ceramics of the system Na2O/K2O/Al2O3/SiO2/BaF2

The transparent glass-ceramics obtained in the silicate system Na₂O/K₂O/SiO₂/BaF₂ show homogeneously dispersed BaF₂ nano crystals with a narrow size distribution. The X-ray diffraction and the nuclear magnetic resonance spectroscopy were applied to glasses and the respective glass-ceramics in order to clarify the crystallization mechanism and the role of fluorine during crystallization. With an increasing annealing time, the concentration and also the number of crystals remain approximately constant. With an increasing annealing temperature, the crystalline fraction increases until a saturation limit is reached, while the number of crystals decreases and the size of the crystals increases. Fluoride in the glassy network occurs as Al-F-Ba, Al-F-Na and also as Ba-F structures. The latter are transformed into crystalline BaF₂ and fluoride is removed from the Al-F-Ba/Na bonds. However, some fluorine is still present in the glassy phase after the crystallization.     

Zwitterionic-type hydrophilic interaction nano-liquid chromatography of complex and high mannose glycans coupled with electrospray ionisation high resolution time of flight mass spectrometry

In this study we describe a new method for rapid and sensitive analysis of reduced high mannose and complex glycans using zwitterionic-type hydrophilic interaction nano-liquid chromatography (nano ZIC-HILIC, 75 μm I.D.×150 mm) coupled with high resolution nanoelectrospray ionisation time of flight mass spectrometry (nano ESI-TOF-MS). The retention of neutral glycans increases with increasing molecular weight and is higher for high mannose glycans than for complex-type glycans. The selectivity of ZIC-HILIC for sialylated glycans differs from that for the neutral glycans and is believed to involve electrostatic repulsion; therefore, charged glycans are eluted earlier than neutral glycans with comparable molecular weight. Due to the improved sensitivity achieved by employing a ZIC-HILIC nano-column, a range of less common complex glycans has been studied and the high resolution mass spectrometry enabled confirmation of glycan composition for the proposed structures. Good sensitivity for glycans was achieved without prior fluorescent labelling, and the time of the analysis was significantly reduced compared to the separation of glycans on a conventional-size column. The proposed method offers a fast and sensitive approach for glycan profiling applied to analysis of biopharmaceuticals.     

Functionality of nano titanium dioxide on textiles with future aspects: Focus on wool

The consumption of titanium dioxide in today's world is on the increase. As the most popular nano substance, TiO₂ is used in various industries notably in the textile industry. More and more recently, through a synergistic combination of photocatalytic features of nanoparticles, fabrics with novel properties are produced. Self-cleaning and stability against UV rays as well as chemical media, to name but a few, are among new prominent properties, obtained on textiles. A common subject reported in most studies has been the diverse approaches to immobilize the nanoparticles on the surface of fabrics. Wool is among common textile materials that have undergone numerous processes to be modified. This review intends to bring to light different aspects of application of nano titanium dioxide in the textile industry especially on wool, and also presents a concise overview on the rigorous pieces of research conducted in this realm.     

Pseudo global energy released locally by crack extension involving multiscale reliability

The energy release rate criterion, being mono scale by definition, is incompatible with the failure behavior of solids that are inherently dual, if not, multiscale. Time span of reliability is scale sensitive and can be addressed with consistency only by use of transitional functions that are designed to transform a function from one scale to another. A pseudo transitional energy release rate G^∗ is defined to address the cross-scaling properties of energy release rate. The reliability of such a function is found to fall quickly when the scale range deviates from that of micro-macro. In general, the time span of reliability based on G^* shortens considerably within the nano-micro and pico-nano scale ranges, resulting in fast turnover of system usability. Prediction accuracy tends to be scale range specific. Stress or strain based criteria are also mono scale. They may be adequate for some situations at the macroscopic scale, but can be ambiguous for multiscale problems. These situations are analyzed by application of the principle of least variance in conjunction with the R-integrals.Accelerated test data for the equivalent of 20 years’ fatigue crack growth in 2024-T3 aluminum panels were analyzed using the mutliscale reliability model. A time span plateau within the micro-macro range is from 8 to 17 years. This corresponds to the reliable portion of prediction, while the terminal 3 years are regarded as unreliable. A similar time span plateau were also found from 4 to 6 years within the nano-micro scale range. And an even smaller plateau hovering around 1.2 years were found for the pico-nano scale range. Time span of reliable prediction narrows with down sized scale range. The overlapping ends of the scale ranges are rendered unreliable as anticipated. These regions can be suppressed by the addition of meso scale ranges. Reference can be made to past discussions related to multiscaling and mesomechanics.